SOLD: 2014 Collings CJ35GSB
Posted: Sat May 21, 2022 12:17 am
SOLD: 2014 Collings CJ35GSB. I'm the original owner. New on November 1, 2014. No issues, no dents/dings. Weight is 4lbs, 0.8oz. Light use swirls on pickguard. Loud, strong guitar. Original case. Strap button added using Collings instructions.
Sounds like this. ... https://www.youtube.com/watch?v=NLIZ3liWPLs
Select German spruce top
Mahogany back and sides
Simple ivoroid rosette
Ivoroid top/back binding
1-style walnut backstrip
Pre-war non-scalloped Adirondack bracing with 3 tone bars
Abbreviated tongue brace
Tigerstripe celluloid pickguard
High gloss nitrocellulose lacquer finish
Mahogany neck
Unbound "Haircut" headstock
15 degree headstock angle
Ebony peghead overlay with inlaid ivoroid Collings logo
African rosewood fingerboard with straight-style bridge
Mortise and tenon hybrid neck joint
20 Frets, neck joins the body at the 14th fret
Vintage-inspired neck profile with 2 5/16" string spacing
14"-26" Compound fingerboard radius
1 3/4" Bone nut and cutthrough saddle
24 7/8" Scale length
Medium 18% nickel-silver fretwire
Mother of pearl dot fingerboard inlays
Fully adjustable truss rod
Ivoroid bridge pins and ebony end pin
Nickel Waverly tuners with ivoroid buttons & 16:1 ratio
SOLD
Thanks for looking!!
![Image](https://i.imgur.com/AMXaOG4.jpg?1)
![Image](https://i.imgur.com/k2yaBv3.jpg?1)
![Image](https://i.imgur.com/bH7rnYt.jpg?1)
![Image](https://i.imgur.com/PqacH0N.jpg?1)
![Image](https://i.imgur.com/3kqtunZ.jpg?1)
![Image](https://i.imgur.com/qqLxTa2.jpg?1)
![Image](https://i.imgur.com/GAVPh0h.jpg?1)
Sounds like this. ... https://www.youtube.com/watch?v=NLIZ3liWPLs
Select German spruce top
Mahogany back and sides
Simple ivoroid rosette
Ivoroid top/back binding
1-style walnut backstrip
Pre-war non-scalloped Adirondack bracing with 3 tone bars
Abbreviated tongue brace
Tigerstripe celluloid pickguard
High gloss nitrocellulose lacquer finish
Mahogany neck
Unbound "Haircut" headstock
15 degree headstock angle
Ebony peghead overlay with inlaid ivoroid Collings logo
African rosewood fingerboard with straight-style bridge
Mortise and tenon hybrid neck joint
20 Frets, neck joins the body at the 14th fret
Vintage-inspired neck profile with 2 5/16" string spacing
14"-26" Compound fingerboard radius
1 3/4" Bone nut and cutthrough saddle
24 7/8" Scale length
Medium 18% nickel-silver fretwire
Mother of pearl dot fingerboard inlays
Fully adjustable truss rod
Ivoroid bridge pins and ebony end pin
Nickel Waverly tuners with ivoroid buttons & 16:1 ratio
SOLD
Thanks for looking!!
![Image](https://i.imgur.com/AMXaOG4.jpg?1)
![Image](https://i.imgur.com/k2yaBv3.jpg?1)
![Image](https://i.imgur.com/bH7rnYt.jpg?1)
![Image](https://i.imgur.com/PqacH0N.jpg?1)
![Image](https://i.imgur.com/3kqtunZ.jpg?1)
![Image](https://i.imgur.com/qqLxTa2.jpg?1)
![Image](https://i.imgur.com/GAVPh0h.jpg?1)